Table of Contents
Advertisement
LED indication and configuration
•
LED flashes orange 3 times when delay off is activated.
Table 2: Device configuration state
#
Configuration
1
Activation LED enabled
2
Activation LED disabled
Note: If the connection fails and the LED indicator turns off, reset the device to factory
default. For more information see,
Manual operation
Table 3: Device operations
Action
Short press the Dim Down
button
Short press the Dim Up button
Long press the Dim Up button
Definition
Green LED appears when the device is powered
on. Green LED does not appear when the device is
powered off.
LED is always off.
Note: The IQ Dimmer-PG and IQ Decora Switch-
PG operations that require feedback overrides
the Activation LED disabled mode. These opera-
tions are the PowerG signal strength test and the
Delay Off Timer.
Resetting the
device.
Status
On
Off
On
Off. Dim value is more than 0%
Off. Dim value is 0%
On. Dim value is less than 100% Increases light brightness
Off
D-308962 IQ Dimmer-PG Install Guide
Function
Turns the light Off.
Keeps the light Off.
Keeps the light On.
Turns the light On and sets to
the previous dim value.
Turns the light On and sets dim
value to 100%.
according to the dim value in
20% increments per second.
Green LED blinks when the dim
value reaches 100%.
Turns the light On to previous
dim setting.
•
If the light is On and the
last percentage dim value is
less than 100%, increase the
light brightness according
to the dim value in 20%
increments.
•
If the last percentage dim
value is 100%, the green
LED blinks.
IQ Dimmer-PG Installation Guide
5
Advertisement
Table of Contents
