Table of Contents
Advertisement
LED indication and configuration
•
LED flashes orange 3 times when delay off is activated.
Table 2: Device configuration state
#
Configuration
1
Activation LED enabled
2
Activation LED disabled
Note: If the connection fails and the LED indicator turns off, reset the device to factory
default. For more information see,
Manual operation
Table 3: Device operations
Action
Short press the Off button
Short press the On button
Double click the Off button
Short press the Off button
Short press the On button
Additional behavior of the device
Behavior
Control the light on or off using the built-in
button
When enrolled
When power is removed from the device
When power is restored to the device
When communication is lost and then restored
Definition
LED turns green when the load is on. LED does not
turn green when the load is off.
LED is always off.
Note: The IQ Dimmer-PG and IQ Power Switch-
PG operations that require feedback overrides
the Activation LED disabled mode. These opera-
tions are the PowerG signal strength test and the
Delay Off Timer.
Resetting the
device.
Status
On
Off
On
Off
On
Delayed Off
Delayed On
Corresponding behavior
The IQ Panel updates the status within 10
seconds.
The IQ Panel registers the device as a PowerG
device.
The IQ panel updates the device status to
unreachable within 14 minutes.
The IQ panel automatically updates the device
status to normal within 5 minutes.
The IQ panel automatically updates the device
status to normal within 5 minutes.
D-308963 IQ Power Switch-PG Install Guide
Function
Turns the light Off.
Keeps the light Off.
Keeps the light On.
Turns the light On.
Switches the light Off after a 5 minute
delay as hardware default.
Immediately turn Off the load and
cancel the delay timer.
Immediately turn Off the load and
cancel the delay timer.
IQ Power Switch-PG Installation Guide
5
Advertisement
Table of Contents
