Page 1
Make sure to use this product together with a 15A circuit breaker. Overview The IQ Dimmer-PG is a wireless smart device that enables you to control your indoor lighting remotely through your control panel. For panels that are compatible with the IQ Dimmer-PG, see https://bit.ly/3r2jWbI.
Figure 3: Connecting the new dimmer Callout Terminal screw marked green Terminal screw marked black Line wire colored black Neutral wire colored white Ground wire colored green Load wire colored red IQ Dimmer-PG Installation Guide D-308962 IQ Dimmer-PG Install Guide...
Page 3
6. Tap Pair. 7. If the device does not automatically enroll, perform a factory reset as indicated in the Resetting the device section of the user manual. Result: The device enrolls successfully. IQ Dimmer-PG Installation Guide D-308962 IQ Dimmer-PG Install Guide...
Page 4
• If the connection fails, a Not enrolled status indicates on the control panel. • The IQ Dimmer-PG enrolls as two individually controlled devices. Checking the PowerG signal strength of the device Ensure that the IQ Dimmer-PG is powered on.
Green LED does not appear when the device is powered off. Activation LED disabled LED is always off. Note: The IQ Dimmer-PG and IQ Decora Switch- PG operations that require feedback overrides the Activation LED disabled mode. These opera- tions are the PowerG signal strength test and the Delay Off Timer.
3 times to indicate a device reset back to factory default. Note: After a device is reset back to factory default, you must delete it from the panel and re-enroll the device. IQ Dimmer-PG Installation Guide D-308962 IQ Dimmer-PG Install Guide...
Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may be received or that may cause undesired operation. IQ Dimmer-PG Installation Guide D-308962 IQ Dimmer-PG Install Guide...
Page 8
(DSC.) could void the user’s authority to operate the equipment. UL/ULC notes The IQ Dimmer-PG has been listed by ETL for home automation applications in accordance with the requirements in the Standards UL 1472:2015 Ed.2+R:31 July 2020 for contacts and dimmers. For UL/ ULC installations use this device only in conjunction with compatible wireless receivers: Qolsys IQ4 IQ4 Hub.
Warranty and EULA To access Warranty and EULA information, access the following link: https://bit.ly/3r2jWbI or scan the following QR code: Technical support Intrusion Tech support: +1- 855-476-5797 #2 or 1-800-387-3630 IQ Dimmer-PG Installation Guide D-308962 IQ Dimmer-PG Install Guide...