Kenwood KR-300HT Instruction Manual page 9

SURROUND.
indicator
3 STEREO
indicator
KRSOOH™ [En/K]
MEMORY indicator
TAPE 2 indicator
N.B. circuit
indicator
a TAPE 2
._ ST.
Broadcast band
Source Direct
7 Indicator
STEREO | s. DIRECT —
DSP
OSP inaicato"
of ax |
AUTO tuning/AUTO
stereo reception indicator
Press to switch the power ON and OFF
@ STANDBY indicator
OSRS 3D indicator
Lights when the SRS 3D system is ON
O SPEAKERS indicator
Lights when the speakers are ON
OSTEREO key
Press to turn the surround ¢ mode OFF
~ 24,
O INPUT SELECTOR knob
Rotate to select the input source
@ VOLUME CONTROL knob
@ PHONES jack
Plug headphones into this jack
@AUTO key
Press to select the tuning mode from the
auto tuning and manual tuning modes
~ 17,
Press and hold the AUTO key for more than
2 seconds to switch the VIDEQ1 display to
another input display. =z
@DSP LOGIC key
@DSP key
@SOURCE DIRECT key
Press to listen to the source sound with a
higher sound quality
@AV AUX (VIDEO) input terminals
Video input termina!
@AV AUX (AUDIO) input terminals
Audio input terminal
24
About the STANDBY indicator