Kenwood KR-300HT Instruction Manual page 13

Sound adjustment functions
Adjusting the tone
@ Ensure that the SRS 3D and S.DIRECT
indicators are not lit. :
@ Select the tone mode to be adjusted (from
BASS, MIDDLE and TREBLE).
SOUND
© Adjust the tone
To increase
level t >
Be
lever
The level can be adjusted between -8 and
KR-3OOHT [En/K)
Make sure that the light is out
ef the S.DIRECT indicator is lit, press the S.DIRECT key to turn it off
If the SRS 3D indicator is lit, press the SRS 3D key to turn it off
Each press of the key switches the modes as follows
(When the SRS 3D Stereo is OFF)
a) BASS : Made for adjusting the low frequencies.
@ MIDDLE Mode for adjusting the middie frequencies.
@ TREBLE: Mode for adjusting the high frequencies.
@® End of setting
eAdjustment of SRS(Sound Retrieval System) 3D Stereo
+ c
Display when "BASS" is selected
The displayed value changes
+8 with an increment or decrement of 2 TOC _— ..! '
per press.
tilt
ot li
l |
Adjusting the left/right sound balance
© Ensure that the SURROUND, 3 STEREO
| PSURROUNG "a STEREOS DMEGTE— Make sure thet the light s out
and S.DIRECT indicators are off.
© Press the SETUP key twice.
SETUP
© Adjust the balance.
To decrease
the left ~
channet sound LEVEL
To decrease —)
the rght —
channel sound
@ Press the SETUP key once or twice to |
return to the previous input setector dis-
play.
Position of the left
Position of the right
speaker
speaker
- I | {
Indicates the center
Indicates the balance setting
@Press twice if SUB-WOOFER has been set
Press once if SUB-WOOFER has not been set
For how to set SUB-WOOFER