Kenwood KR-300HT Instruction Manual page 16

Recording _
When recording sound with arecorder component of KENWOOD, synchro recording is possible by setting the INPUT SELECTOR
to select TAPE1 or MD according to the connected component.
Preparation
e@Switch the VIDEO1 display to TAPE1 or MD with the following Each press switches the display.
operation f 1
@ Select VIDEO? with the INPUT SELECTOR. VIDEO1 — 2TAPET - 3=MD
© Press and hold the AUTO key for more than 2 seconds.
To record a music source
The input sources are switched in the following order
@ Select the source to be recorded.
INPUT SELECTOR : (TUNER (frequency display)
@PHONO
( \ @VIDEO1 (TAPE? or MD}
7 @cD
®@VIDEO2
@®AV AUX
Select an input
source other than
© Play the source and start recording.
Copying tape (Tape dubbing TAPE 2— TAPE 1)
Lights
@ Press the TAPE 2 MONITOR key. é i .
TUNING | TAPED :
ji ceagiool BAND DISPLAY ~~ A_MONITOR q we, Ti :
:
fe) SN
Ll
CA U fee ee |
@ Select a source other than TAPE 1.
oO
Copying tape (Tape dubbing TAPE 1 -» TAPE 2)
@ Select TAPE 1 with the INPUT SELECTOR control of the
main unit.
@ Play the cassette deck connected to the TAPE 1 jacks and
Start recording of the cassette deck connected to the
TAPE 2 jacks.
Regarding TAPE 2 MONITOR
A cassette deck or graphic equalizer can be connected to this unit's TAPE 2 MONITOR terminals. If you connect a graphic equalizer, turn the
TAPE 2 MONITOR key ON. If you connect a 3-head cassette deck, you can monitor the source sound, or the sound being recorded, while
recording. Pressing the TAPE 2 MONITOR key lets you compare the recorded sound and the source sound. Refer to the operating manual
for the component you connected for further details