Kenwood KR-300HT Instruction Manual page 2

2 Bef or e applying power comes, Gaution : Read this section carefull to
_ Units are designed for operation as follows.
U.S.A. and Canada
Australia
ensure
SES
. AC120 V only Europe and U.K...
AC 240 V only China and Russia
AC 238 V only
AC 220 V only
*Other countries AC 110-120/220-240 ¥ switchable
*AC voltage selection AC voltage selector switch
The AC voltage selector switch on the rear panel is set to the voltage
aC 170- AC 220-
that prevails in the area to which the unit is shipped.
Before connecting
20 2aov~
the power cord to your AC outlet, make sure that the setting position
of this switch matches your line voltage. If not. it must be set to your
voltage in accordance with the following direction
Note:
Our warranty does not cover damage caused by excessive line voltage
due to improper setting of the AC voltage selector switch
match your line voltage
with a small screwdriver or other pointed tool.
Safety precautions _. fully ensure sat
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALI-
FIED SERVICE PERSONNEL
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS IN-
TENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN
THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS
Accessories