Kenwood KR-300HT Instruction Manual page 18

Select the TUNER input.
Receiving radio stations by specifying its frequency
INPUT SELECTOR
KR-3QOHT [En/K]
The input sources are switched in the following order
@TUNER (frequency display)
@PHONO
@VIDEO1 (TAPE1 or MD)
@cD
© VIDEO2
®AV AUX
Frequency display
fl
| ee Ge
2 | Select the broadcast band.
TUNING TAPED
BAND DISPLAY A MONITOR
a
AUTO DIRECT MEMOAY
tC
@ Enter the frequency of the desired
station.
" Press the numeric keys according to the frequency to be tuned as
shown below
*AM10kKH2/FM100kHz territories (U.S.A., Canada. etc.)
AM 810 kHz........... B), [9 { 10 kHz space)
AM 1260 kHz f4], (2). [) ( 10 kHz space)
FM 89 MHz... {a}, [9]. [o] (100 kHz space}
FM 92.5 M#z......... (9). [2]. (5) (100 kHz space}
*AM9kHz/FM50kHz territories {other countnes)
AM 810 kHz... ( 9kHz space)
AM 1260 kHz ( 9 kHz space)
FM 89 MHz B.S. oO. ©
( 50 kHz space)
FM 92.5 MHz... (gs). 2). (J. ©) ( 50 kHz space}
"FM DE-EMPHASIS/CHANNEL SPACE switch ~B
Frequency indicator
m7
"TUNED" tights up when a station is tuned.
elf you make a mistake, the frequency display blinks for a few seconds
In this case, repeat step B from the beginning