Section 4 − Specifications; Serial Number And Rating Label Locations; Weld, Power, And Engine Specifications; Air Compressor Specifications - Miller Big Blue Air Pak 600 Owner's Manual

4-1. Serial Number And Rating Label Locations

The serial number and rating information for this product is located on the right side. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.

4-2. Weld, Power, And Engine Specifications

.
This equipment will deliver rated output at an ambient air temperature up to 1045F (405C).
Weld
Welding
Output
Mode
Range
CC/DC 20−600A
CV/DC 13−50 V
* With Low OCV Voltage Reducing Device (VRD) switch enabled, open−circuit voltage is 13 to 15 volts DC until arc initiation for Stick Welding.

4-3. Air Compressor Specifications

Compressor Model And
Type
Ingersoll Rand CE55 G
Rotary Screw

4-4. Environmental Specifications

A. IP Rating
This equipment is designed for outdoor use. It may be stored, but is not intended to be used for welding outside during precipitation unless
B. Temperature Specifications
Operating Temperature Range*
−40 to 104°F (−40 to 40°C)
*Output is derated at temperatures above 104°F (40°C).
.
Complete Parts List available at www.MillerWelds.com
SECTION 4 − SPECIFICATIONS
Maximum
Rated
Open-Circuit
Welding
Voltage
Output
(Nominal)
92*
600A, 44
VDC, 60%
Duty Cycle
575A, 43
VDC, 100%
Duty Cycle
92
Air Output At Effective Working
Pressure
3 −1
60 scfm (1.7 m min
100 psi (690 kPa),
100% Duty Cycle
Generator Power
Rating
Independent of
Weld Output
Single-Phase,
4 kVA/kW, 34/17 A,
120/240 V AC, 60 Hz
3-Phase Generator
(In Addition To Standard 4
kVA/kW Generator Power)
Single-Phase/
Three-Phase,12/20 kVA/kW,
50/48 A, 120/240 VAC, 60 Hz
Factory Pressure Setting
),
125 psi (862 kPa)
IP Rating
IP23S
sheltered.
Storage/Transportation Temperature Range
−40 to 131°F (−40 to 55°C)
Fuel Tank
Engine
Capacity
Deutz TD2.9L4
Liquid-Cooled,
Four-Cylinder,
25 gal
Turbo-Charged
(95 L)
65.7 HP Diesel Engine
Tier 4 Final Compliant
Safety Relief
Valve Rating
150 psi (1034 kPa)
IP23S 2014−06
Temp_2016- 07
OM-275624 Page 19