Your Audigy 2 Platinum Ex External I/O Module - Creative Sound Blaster Audigy 2 Platinum eX User Manual

Your Audigy 2
Platinum eX
External I/O
Module
Click any circled number in the
diagram to see a description of
the item.
• To connect your existing
computer headphones and
microphone to the External I/
O Module, use a 3.5 mm (1/
8") minijack to 1/4" plug
adapter.
• Set the gain level of the Mic In
2 jack to the minimum before
connecting or turning on a
microphone, especially if you
are using headphones.
Your Sound Blaster Audigy 2 Platinum eX External I/O Module has these jacks, connectors and controls:
1 2
10
Figure 1-3:
5 6
3 4
12 13
11
Jacks, connectors and controls.
About your Sound Blaster Audigy 2 Platinum eX hardware 1-3
7 8 9
15
14