Table of Contents
Advertisement
Chapter 3. application solution
3.6.20 What triggers "cam_hal: EV-VSYNC-OVF"in esp32-camera?
This issue occurs when the frame synchronization signal triggered by the sensor is too fast. You can
troubleshoot it following the steps below:
• Run the
esp-iot-solution/examples/camera/pic_server
indicates that the issue is not hardware-related.
• Check the XCLK and resolution specified during sensor initialization. A smaller resolution or a
larger XCLK can cause the frame synchronization signal triggered by the sensor to be too fast.
Note that the XCLK used by the sensor should match the specified resolution.
3.7 Community sw and platforms
3.8 ESP Matter
3.8.1 Which ESP modules can be connected to Matter?
• Please refer to
Espressif Matter
3.8.2 What learning materials are available to get started with ESP Matter?
You can refer to:
•
ESP Matter Github
•
Espressif Matter series blog
•
Espressif Matter solution video
•
Espressif Matter Demo video
3.8.3 Can I compile and develop ESP Matter on Windows?
• It is currently not possible to compile on Windows. Also, it is not recommended to use a virtual machine for
ESP Matter development, as the Matter Controller will use Bluetooth hardware where unknown errors may
occur with the virtual machine. Using Linux or macOS systems directly are recommended.
3.8.4 Where can I find the Matter protocol documentation?
Currently, Matter's standard protocol has been made public, you can
the documentation on the
Espressif Systems
Platforms.
CSA Alliance official
website.
32
Submit Document Feedback
example. If the example runs correctly, it
submit a request and download
Release master
Advertisement
Table of Contents
Need help?
Do you have a question about the ESP and is the answer not in the manual?