Audi A7 Sportback 2014 Owner's Manual page 60

58 Seats and storage
The follow ing settings are stored:
Remote Memory button
control
master
key
Driver Driver Front
passen-
ger
Seat X X X
Steering
X X
wheel*
Both exterior
X X
rearview mir-
rors*
Remote control key
Applies to vehicles: with memory functio n
To assign the driver's seat settings to the re-
mote control key when locking the vehicle, the
function must be switched on.
>
Select:
I
CAR I
funct ion button> (Car)* sys-
tems
control button >
Vehicle settings
>
Seats > Driver seat > Remote control key
>
On.
I@
Tips
If you do not want another driver's set-
tings to be assigned to the remote control
key, switch off the memory function using
the MMI or the
IOFF !
button
c:::>
page 58.
Memory buttons
Appl ies to vehicles: with memory func tio n
Fig. 52 Driver's doo r : memory function buttons
The memory buttons are located in the driv-
er's/fro nt passenger's* door .
>
To store a seating profile, press the
ISE T!
but ton and then one of the memory but-
tons.
>
To recall a seating profile, press and hold
the memory button until the seat is adjust-
ed to the stored settings.
>
To switch the memory function for the driv-
er or front passenger off, press the
I OF F
I
button . The word OFF lights up when the
memory function is switched off . Seating
p rof iles will not be sto red .
A
WARNING
- For safety reasons, the seat setting
should only be recalled when the veh icle
is stationary - otherwise you risk having
an accident.
- If necessary, you stop the process by
pressing the
I
OFF !
button or any of the
memory buttons.
Adjusting the front passenger seat in
the MMI
Applies to vehicles: with memo ry function
The driver can adjust the position of the front
passenger seat.
Adjusting the front passenger seat from
the driver's side
>
Select:
! CARI
function button> (Car) * sys-
tems control button > Vehicle settings >
Seats > Front passenger seat > Adjust seat
position .
>
You ca n now adjust the front passenger seat
using the buttons on the driver's seat
c:::>
page 54, fig. 46.
Matching the position of the driver's seat
>
To adjust the front passenger seat to match
the dr iver's seat settings, select the
ICARI
function button >
(Car)* systems
control
button > Vehicle settings > Seats > Front
passenger seat> Symmetry to driver seat.
>
Press and hold the control knob unt il the ad-
justment process is complete.