4' Vega Jib Setup
•
Completely stretch and open the section of
4ft Vega Jib, as shown in the image.
•
After opening the section, loosen the
bottom and side knobs of the Central Fork.
•
Loosen the inbuilt grub screw in the central
fork with the help of 1/8 Allen key.
Feature: Central Fork mechanism facilitates
ultra-smooth
pan-tilt
absorbing unwanted vibrations for cleaner
shots.
•
After removing the screw, remove the
central part so that the mounting of the jib
becomes baby pin, then the jib can be
mounted on the 5/8 baby pin stand
(Not Included).
•
Mount the Vega jib section on the Jib Stand
(Not Included).
•
After mounting the jib, tighten the both
knobs while aligning the holes with each
other.
•
Insert counter weight into jib section.
•
Then stabilize the counter weight with the
help of the knob.
•
Insert the weight rod into the section.
•
4' Vega jib is assembled as shown.
movements
while
2