Related Manuals for Morris MDB-12160HIW
Summary of Contents for Morris MDB-12160HIW
- Page 7 Desired humidty set to 50-55% relative humidity and it can be adjusted by pressing UP/DOWN keys. Press the SLEEP key to activate the SLEEP mode. The indicator light will illuminate. Press the SLEEP key again to quit the SLEEP mode, then the device will work as per the last setting before the SLEEP mode.
- Page 8 Press this button, the function is turned on or off, the dry mode indicator is on/ off. After the function is turned on, the front panel humidity display shows 35% and the humidty is not adjustable. In this mode, the compressor does not stop and continues to run until the water tank is full or you turn off this function.
- Page 9 Select the HIGH or LOW mode to change the desired humidity from 35% RH to 80% RH. The fan speed will not change in these two modes.
- Page 11 THE CORRESPONDING INSTRUCTION OF MACHINE AND REMOTE CONTROL Select the functions of the unit for: SMART and FAN in the MODE control. In the SMART mode, the default humidity is 55%. Press Up or Down key when the unit is displaying the current relative humidity to select the desired humidity level.Humidity level can be set within a range of 35% RH to 80% RH in 5% increments.It means the SMART mode of the unit is a combination of Dehumidification and Auto.
- Page 14 blue...
- Page 17 blue blue...
Need help?
Do you have a question about the MDB-12160HIW and is the answer not in the manual?
Questions and answers