Maytag MAV-1 Use & Care Manual page 7

Control features vary by model.
Wash/Rinse Tem p
Automatic Temperature Con[to
A,T,C
Cold Warm
Ware /f_ 2_' ,,%
A,T,C
:_ Cold
Cold / '% Warm
_ Cold
Hot
cq_
Signal
Capacity / Quiet Series I00 / 3 Speed Select / 17 Cycles
Spin
On _- Rinse
Delicates
Light
Normal _
Off
Extra
Rinse
Ex. Heavy
Extra Off
Heavy. Regular
Rinse i_lormal
off
Rinse
Fxtended Sain
On
off
3ff
Finger
Off Heav_ Fauce[
S_in . Normal
Rinse Light Pull to Start- Push to Stoo
Wrinkle Control
Select Cycle
To select a cycle, push the control dial in (off position)
and turn it to the right (clockwise) until the pointer is at
the soil level needed for the wash load in the Regular,
Wrinkle Control or Delicates cycles.
Regular Cycle
Provides normal agitation and normal spin speeds to
wash cottons and heavily soiled items. For maximum
cleaning, set the dial at Extra Heavy.
Wrinkle Control Cycle
Provides normal agitation and slow spin speed to
protect wrinkle control fabrics.
Delicates Cycle
Provides slow agitation speed and slow spin speed for
delicates and knits.
Select
Options
(if desired)
Extra Rinse
When the switch is in the On position, an additional
rinse at the end of the Regular, Wrinkle Control and
Delicates cycles is provided to more completely
remove laundry additives, suds, perfumes, etc.
End of Cycle Signal (select models)
The End of Cycle Signal will sound once the cycle is
completed. The End of Cycle Signal can be canceled by
setting the switch to Off.
Pull Control Dial Out to Start
You may stop the washer at any time by simply
pushing the control dial in. Therefore, it is possible to
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed in (off position) when you change the setting.
I Note:
Do not attempt to turn the control dial
counterclockwise. Damage to the timer will result.