Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Idis TC-T4221WRXP
Summary of Contents for Idis TC-T4221WRXP
- Page 1 DirectCX CAMERA Installation Manual...
-
Page 2: Before Reading This Manual
Before reading this manual This is a basic installation manual for use of an IDIS camera. Users who are using this product for the first time, as well as users with experience using comparable products, must read this operation manual carefully before use and need to the warnings and precautions contained herein while using the product. -
Page 3: Safety Precautions
Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 10. Overloading 1. Read Instructions Do not overload wall outlets and extension cords as this can result in All the safety and operating instructions should be read before the the risk of fire or electric shock. -
Page 4: Eu Conformity Statement
IDIS Co., Ltd. reserves all rights concerning this operation manual. Use or duplication of this operation manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this operation manual are subject to change without prior notice for reasons such as functionality enhancements. - Page 5 Accessories Upon purchasing the product, check inside the box to make sure all the following accessories are included. External appearances and colors of the accessories may vary depending on the model. CAMERA CAMERA SUN-SHEILD WASHER FOR SUN-SHIELD SCREW (4EA), ANCHOR (4EA), QUICK GUIDE SCREW FOR SUN-SHIELD (1EA) TERMINAL BLOCK(1EA.
- Page 6 CABLE DC12V ① ① BNC (CVBS VIDEO OUT) BNC-Yellow ② ② BNC-Black BNC (HD-TVI VIDEO OUT ③ DC-JACK ③ DC12V DUAL(DC12V/AC24V) ① ① BNC (CVBS VIDEO OUT) BNC-Yellow ② ② BNC (HD-TVI VIDEO OUT) BNC-Black ③ ③ DC/AC-JACK DC12V / AC24V ①...
- Page 7 DIMENSION...
-
Page 8: Camera Setting Menu
Camera Setting Menu - 1 MENU Details-1 Details-2 Details-3 IRIS BRIGHTNESS 0 ~ 20 AUTO DEBLUR/NORMAL 1/30, 1/60, 1/120 , 1/240, 1/480, 1/1000, SHUTTER MANUAL 1/2000, 1/4000, 1/8000, 1/15000, 1/30000 EXPOSURE FLICKER SENS_UP OFF, X2 ~ X32 0 ~ 10 MODE NIGHT ONLY，... - Page 9 Camera Setting Menu - 2 MENU Details-1 Details-2 Details-3 0 ~ 10 SHARPNESS 0 ~ 10 GAMMA 0.45/0.55/0.65/0.75 MIRROR ON/OFF FLIP ON/OFF DEFOG ON MODE MANUAL/AUTO ON LEVEL LOW/MIDDLE/HIGH PRIVACY OFF IMAGE ZONE NUM 0 ~ 15 ZONE DISP ON/OFF H-POS 0 ~ 60 V-POS...
-
Page 10: Color Bar
Camera Setting Menu - 3 MENU Details-1 Details-2 Details-3 IMAGE RANGE FULL/COMP/USER COLOR SPACE HD_CbCr/YUV/SD_CbCr COLOR BAR ON/OFF SYSTEM LANGUAGE ENG/KOR/JPN/CHN(S)/CHN CAM TITLE OFF/LEFT DOWN/RIGHT UP RESET EXIT SAVE/CANCEL... -
Page 11: Specifications
Specifications Camera Image Sensor 1/2.8 Inch SONY CMOS Resolution 1080P Full HD Max. Resolution 1945(H) x 1097 (V) TV System PAL / NTSC Electronic Shutter Auto, 1/30~1/30,000 S/N Ratio More than 50dB Lens Focus Length 2.8~12mm Pixels 2M Pixel Night Vision Infrared LED 4 High Power LED Infrared Distance... -
Page 12: Troubleshooting
Trouble Shooting Problem Check • Check the power cable connection. The main unit won't turn on. • Check the power outlet. • May be the power supply voltage abnormity, please check No Picture after providing power the power supply voltage and pole whether exactitude. Please check all the connecting cable and monitors whether be connected correctly or not. - Page 13 Use power supply external sync. camera can solve it. > The picture smear too mass The power supply’s voltage unstable. Connecting cables not connect correctly or have high impedance. IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...
- Page 14 IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...
Need help?
Do you have a question about the TC-T4221WRXP and is the answer not in the manual?
Questions and answers