Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions 10. Overloading All the safety and operating instructions should be read before the Do not overload wall outlets and extension cords as this can result appliance is operated.
IDIS Co., Ltd. reserves all rights concerning this document. Use or duplication of this document in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this document are subject to change without prior notice for reasons such as functionality enhancements.
Screws and Anchors (each 2ea.) Protect Connector Allen Wrench Desiccant Please download software (IDIS Discovery, IDIS Center, IDIS Solution Suite Compact) and product manual from this link : -IDIS Website (www.idisglobal.com) - Search IDIS Discovery, IDIS Center, IDIS Solution Suite Compact. Overview • Product color and design may vary depending on the model.
Wall/Ceiling Bottom Cover Installation Hole Network Port Cable Rubber Camera Installation Removing the Dome Cover Loosen the screws counterclockwise using the Push the SD memory card until it disengages Allen wrench provided with the product. from the slot, and then pull it out. microSD Logo is a trademark of SD-3C, LLC.
Page 6
If you insert a thin cable or more than two cables, it is advised to finish by using silicon to make sure to perfectly waterproof it. (Silicon finishing part — refer to the bottom image.) Connect external devices, the network cable, and the power adapter.
Angle Adjustment Closing the Dome Cover Fasten the screws for the dome cover clockwise using the Allen wrench provided with the camera. Lens Rotation Horizontal Rotation Vertical Rotation Remove the protective film outside. Network Camera...
Need help?
Do you have a question about the DC-D4516WRX and is the answer not in the manual?
Questions and answers