Safety Precautions This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique la classe A est conforme à la norme NMB-003 du Canada. WARNING Warning: Do not install this equipment in Caution: The sensor may be burned out by a confined space such as a bookcase or a laser beam, so when any laser equipment RISK OF ELECTRIC...
7. Do not block any ventilation any way, such as power supply cord or • Places exposed to rain. • Do not use the camera in such place openings. Install in accordance with the plug is damaged, liquid has been spilled where rapid temperature fluctuation by •...
Part Names and Functions • Factory Reset Switch: If you turn the lid on the bottom of the product counterclockwise, there is a switch. It is used only to return the set value to the factory default setting. For details, refer to the “Factory Reset” section below. •...
For more information on network connection setup, refer to the IDIS Discovery manual. ☞ Check your local laws and regulations on making video or audio recordings. The user will be held liable for any violation of the law.
Installation 1. Screw the camera sun shield to the camera using the screw and rubber provided with the camera. 2. Screw the mounting bracket to the wall or ceiling by using screws provided with the camera. 3. Screw the bottom cover to the mounting bracket by using screws provided with the camera.
Page 8
IDIS Co., Ltd. For more information, please visit www.idisglobal.com...
Need help?
Do you have a question about the DC-T1244WR and is the answer not in the manual?
Questions and answers