5Tone Encode Group Selection - AnyTone AT-398UV Instruction Manual

FUNCTION MENU SETUP
3. Press key to choose CTCSS,DCS or OFF, when DCS signaling is selected,
press key to choose DCS positive or inverse code.
4. Rotate channel switch to choose desired CTCSS/DCSencode/decode.
CTCSS: 62.5Hz~254.1Hz, 51groups in total, and 1 group user-defined code.
DCS: 000N-777I, 232 groups in total. "N" stands for positive code, "I"
stands for inverse code.
5. Press or

5TONE encode group selection

1. Press key, the top left corner of LCD displays "
2. Press / key to choose NO.04 function item, it shows "5T-ENC" on LCD.
3. Rotate channel switch to choose desired 5TONE encode group.
CALL00~CALL99, 100 groups in total for optional.
4. Press [PTT] key to transmit selected 5TONE encode, press
5TONE encode must be programmed by software, only the groups with editing 5TONE can be
selected. When 5TONE encode is editing with name, transceiver will display name, otherwise
will display " CALL XX ".
30
key to confirm and exit.
" icon, then press
key or
key to enter into function menu.
key to confirm and exit.