Led Behavior - Zte MC889 Quick Start Manual

LED Behavior

When setting up the MC889, the LED will have the following behavior.
Indicator
POWER
NETWORK
LAN
SIGNAL
(Three lights)
NOTES:
To avoid light pollution and save energy, indicators will be turned off after the
y
device operates normally for about 15 minutes. If indicators need to be solid
on, you can change its settings on the 5G Outdoor CPE configuration page.
When a problem occurs, indicators will be automatically lighted up again to
y
help you check the device status. After the problem is resolved, indicators will
be turned off immediately.
Status
Power is on and external power supply is working
On
normally.
Off Power is off.
The device is in error status:
y The device is not registered to the mobile
Red blinking
y There is no nano-SIM card inserted.
y There is no network service available.
The device is registered or connected to the 5G
Green on
network and data is being transferred.
The device is connected or connected to the
Green blinking
3G/4G LTE network and data is being transferred.
Green on The LAN port is connected.
Green blinking Data is being transferred.
Off The LAN port is not connected.
Three lights show the signal strength. More lights
On
on means better signals.
There is no signal or no nano-SIM card is
Off
inserted.
Description
network.
53