Brush Head Mode Pairing - Philips sonicare DiamondClean Smart Manual

BrushPacer
SmarTimer

Brush Head Mode Pairing

If you apply excess pressure, the handle changes its
vibration and the brushing feedback light flashes purple
at the bottom of the handle until you reduce the
pressure.
Note: Your product comes with the Pressure Sensor
activated. To deactivate this feature (see 'Activating or
deactivating features').
The BrushPacer is an interval timer that helps you to
brush evenly through the mouth by dividing your mouth
into 6 sections. (see 'Brushing instructions')
The SmarTimer indicates that your brushing cycle is
complete by automatically switching off the toothbrush
at the end of the brushing cycle.
Dental professionals recommend brushing no less than 2
minutes twice a day.
Note: If you press the power on/off button after you
started the brushing cycle, the toothbrush pauses. After a
pause of 30 seconds, the SmarTimer resets.
Brush heads with BrushSync technology are equipped
with a microchip which communicates with the handle
and automatically pairs it with the recommended mode
and intensity.
Most brush heads with BrushSync technology will auto
pair to Clean Mode. Brush heads with specific benefits
will pair with the corresponding mode (when available),
examples include:
- G3 Premium Gum Care : Gum Health mode
- W3 Premium White: White+ mode
- TongueCare+: Tongue Care mode
Note: If you choose to change mode/intensity from the
recommended setting, the brush head will remember the
your chosen setting for future brushing sessions.
17
English