Toothbrush Handle; Brush Head - Philips sonicare Flexcare+ HX6922 Manual

Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
14
Note: The sanitiser cycle runs for 10 minutes and then automatically
switches off.
The sanitiser is in operation when the blue light glows through the
,
window.
When the sanitising cycle is complete, the sanitiser automatically
,
switches off.
Cleaning
Do not clean the brush head, handle, travel charger, charger cover and
the UV sanitiser in the dishwasher.

Toothbrush handle

1
Remove the brush head and rinse the metal shaft area with warm
water (Fig. 16).
Do not push on the rubber seal on the metal shaft with sharp objects,
as this may cause damage.
2
Use a damp cloth to wipe the entire surface of the handle.

Brush head

1
Rinse the brush head and bristles after each use (Fig. 17).
2
Remove the brush head from the handle and rinse the brush head
connection at least once a week with warm water.
Charger
1
Unplug the charger.
2
Use a damp cloth to wipe the surface of the charger.
- Charger 100-240V ~, 50/60Hz, 0.4-1.4W
Sanitiser (specific types only)
Do not clean the sanitiser when the UV light bulb is hot.
For optimal effectiveness, it is recommended to clean the sanitiser weekly.
1
Unplug the sanitiser.
35_021_4216_1_DFU-SImple_A6_v5.indd 14
24/11/17 13:32

Advertisement

Table of Contents
loading

Table of Contents