Charging And Battery Status - Philips sonicare DiamondClean Smart Manual

20
English
Step 1: Place the handle on the charging stand or in the
charging glass.
Step 2: Press and hold the mode/intensity button.
EasyStart
Press the power
on/off button 1
time.
¯
Step 3: Let go of the mode/intensity button.
If you see the battery indicator flash white 2 times and hear 2
beeps then the feature has been activated.
If you see the battery indicator flash amber 1 time and hear 1
beep, then the feature has been deactivated.

Charging and battery status

Pressure Sensor
Feedback
Press the power
on/off button 2
times.
¯
OR
This Philips Sonicare toothbrush is designed to provide at
least 28 brushing sessions, each session lasting 2 minutes
(14 days if used twice per day) on a fully charged battery.
The battery indicator shows the battery status when you
complete the 2-minute brushing session, when you pause
the toothbrush, or while it is charging.
Note: It can take up to 24 hours to fully charge the
battery before first use, but you can use the Philips
Sonicare toothbrush before it is fully charged.
Brush Head
Replacement Reminder
Press the power on/off
button 3 times.
¯