Home Connect; Setting Up Home Connect; Home Connect® Settings; Changing The Settings Via The Home Connect® App - Thermador Masterpiece Series Use And Care Manual

Operating the appliance on the appliance itself always
¡
takes priority. It is not possible to operate the appliance
using the Home Connect® app during this time.
In networked standby mode, the appliance requires a
¡
maximum of 2 watts.
12.1 Setting up Home Connect®
Requirements
The appliance is connected to the power supply and is
¡
switched on.
You have a mobile device with a current version of the
¡
iOS or Android operating system, e.g. a smartphone.
The mobile device and the appliance are within range of
¡
your home network's WLAN signal.
Download the Home Connect® app.
1.
Open the Home Connect® app and scan the following
2.
QR code.
Follow the instructions in the Home Connect® app.
3.
12.2 Home Connect® settings
Adapt Home Connect® to your needs.
You can find the Home Connect® settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect® has been
set up and whether the appliance is connected to your
home network.
12.3 Changing the settings via the
Home Connect® app
You can use the Home Connect® app to change the
appliance settings and send them to the appliance.
Prerequisits for using the Home Connect®:
The appliance is connected to the home network and to
¡
the Home Connect® app.
In order to set the appliance via the app,
¡
Home Connect® must be activated in the basic settings.
Activate Home Connect ON in the oven basic settings.
The oven must be turned on.
¡
12.4 Remote start
If you want to start an oven operation using your mobile
device, you must activate Remote Start.
WARNING
REMOTE OPERATION This appliance is configurable to
allow remote operation at any time.
Do not store any flammable materials or temperature
▶
sensitive items inside, on top or near surface units of
the appliance.
Notes
For some models a permanent Remote start can be
¡
activated via the Home Connect® app. This function
allows a remote start of the available operating modes
without automatically deactivating Remote start.
Remote start can only be activated if the
¡
Home Connect® set-up has been successfully
completed.
Some operating modes can only be started on the oven
¡
itself.
Setting remote start
Press MENU.
1.
Swipe to select ⁠ "Remote Start".
2.
appears in the display.
a
When you start the oven operation on the appliance,
a
remote start is automatically activated. You can make
changes from your mobile device or start a new
operation.
Note: If set to manual for remote control level, REMOTE
START must be enabled the day you intend to use it.
Opening the oven door after enabling REMOTE START
will deactivate it in certain circumstances. If so, pressing
REMOTE START will enable it again.
12.5 Setting remote control
You can use the Home Connect® app to easily access the
functions of your oven.
Notes
You can select from three different remote control
¡
preferences.
Operating the appliance directly from the oven always
¡
has priority. During this time, it is not possible to operate
the oven using the Home Connect® app.
The remote control is already activated when you
¡
connect your oven.
If the remote control has been deactivated, only the
¡
oven's operating statuses will be displayed in the
Home Connect® app.
The remote control is automatically activated when
¡
remote start is activated.
Press MENU.
1.
Swipe to the left or right on the top line to select
2.
"Settings".
Touch "Continue".
3.
Home Connect® en-us
⁠
29