Table of Contents
Advertisement
15. PCI-Express x4 slot (SLOT2)
17. Rear-chassis fan connector (FAN SYS1)
19. Liquid cooling pump fan connector (FAN PUMP)
21. Power-supply connector (ATX3)
23. Power-supply connector (ATX2)
25. Top-chassis fan connector two (FAN_SYS5)
27. Memory-module slot, DIMM2
29. Side-light connector (SIDE LIGHT)
Recommended tools
The procedures in this document may require the following tools:
● Philips screwdriver #1
● Flat-head screwdriver
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Power-supply unit bracket
Power-supply unit bracket (for
computers shipped with clear
left-side cover)
Power-supply unit
Power-supply unit (for
computers shipped with clear
left-side cover)
Side light (for computers
shipped with clear left-side
cover)
Radiator and fan assembly for
liquid cooler
Rear-chassis fan
Lower front-chassis fan
Screw type
Quantity
#6-32x1/4"
2
#6-32x1/4"
2
#6-32x1/4"
4
#6-32x1/4"
4
M3x5
2
M3x5
2
M3x5
1
M3x5
1
16. PCI-Express x16 mechanical/x16 electrical slot (SLOT1)
18. Rear-chassis fan LED connector (LED FAN SYS1)
20. Liquid-cooling pump LED connector
22. Top-chassis fan connector one (FAN_SYS4)
24. CPU socket
26. Memory-module slot, DIMM1
28. SATA power connector (SATA PWR)
Removing and installing components
Screw image
13
Advertisement
Table of Contents
