Table of Contents
Advertisement
Installing the upper front-chassis fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the upper front-chassis fan and provide a visual representation of the installation
procedure.
Steps
1. Lay the computer on its right side.
2. Align the upper front-chassis fan with the slot on the chassis.
3. Push the upper front-chassis fan into the slot on the chassis until its releasing clip is locked into place.
4. Connect the upper front-chassis fan cable to the system board.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
After working inside your
computer.
82
Removing and installing components
Advertisement
Table of Contents
