2. Remove the
left-side
3. Remove the
top
cover.
4. Remove the
right-side
5. Remove the
front
bezel.
6. Remove the
memory
modules.
7. Remove the
single-graphics
8. Remove the
2230 solid-state drive
9. Remove the
2230 solid-state drive
10. Remove the
wireless
card.
11. Remove the
processor liquid-cooling assembly
12. Remove the processor.
13. Remove the
VR heat
sink.
About this task
The following image indicates the connectors on your system board.
88
Removing and installing components
cover.
cover.
card.
or the
2280 solid-state drive
or the
2280 solid-state drive
in SSD slot one, as applicable.
in SSD slot two, as applicable.
or
processor fan and heat-sink
assembly, as applicable.