Advertisement
DEVIreg™ 532
2.
Connect the thermostat according to the connection
diagram.
The screen of the heating cable must be connected
to the earth conductor of the power supply cable by
using a separate connector.
Note: Always install the floor sensor in a conduit in
the floor.
3.
Set the maximum floor temperature between 20 °C
and 50 °C by turning the screw with temperature
indications in the upper left corner.
4.
Mount and reassemble the thermostat:
• Fasten the thermostat to a flush-mounting box
or a surface-mounting box by driving the screws
through the holes in each side of the thermostat.
• Install the frame and front cover in the reverse
order of disassembly.
5.
Turn on the power supply.
Installation Guide
N
L
N
L
LOAD
LOAD
Mains
Max. Load
220-240V~
15 (1) A
D532
NTC
IP31
-10T30
9
9
Advertisement
