Miele PDR 910 EL SOM Operating And Installation Instructions page 67

 Risk of damage due to solvent-based cleaning agents and ab-
rasive cleaners.
Solvent based cleaning agents, abrasive cleaners, glass cleaners
or all-purpose cleaners can cause damage to plastic surfaces and
other parts.
Clean the tumble dryer with a slightly damp cloth and a mild non-
abrasive cleaning agent or soapy water.
Clean the seal around the inside of the door with a damp cloth.

The tumble dryer drum must be wiped clean with a soft, damp cloth

after drying items that have been starched.
Dry all parts with a soft cloth.

The drum and other stainless steel parts can be cleaned with a suit-

Zusätzliche Reinigung
able stainless steel cleaner if you wish.
The air intake vent is located on the rear of the tumble dryer.
– Gebläserad
This vent must never be covered or blocked with objects.
Das Gebläserad hinter der Flusenfilter-
Keep the area around the tumble dryer – in particular the air intake
– clear of fluff.
klappe kann mit Waschmittelresten und
Flusen verklebt sein.
- Fan impeller
The fan impeller behind the fluff filter flap may be clogged with deter-
Kontrollieren Sie das Gebläserad
gent residues and fluff.
von Zeit zu Zeit und reinigen Sie es,
Check the fan impeller from time to time and clean it if it is heavily
wenn es stark verklebt ist.
soiled.
Using a damp cleaning cloth, carefully remove the coating on the

^ Entfernen Sie mit einem feuchten
fan impeller.
Tuch vorsichtig den Belag vom Ge-
Also clean the area in front of the fan impeller.

bläserad.
Use a vacuum cleaner to remove fluff.

^ Reinigen Sie ebenso den Bereich vor
dem Gebläserad.
^ Saugen Sie Flusen mit dem Staub-
sauger ab.
Cleaning and care
67