Table of Contents
Advertisement
Drip Tray Emptying
1. When the drip tray is full, empty it by holding the appliance with one hand while
lifting the drip tray with the other hand and detaching it from the hooks on the
base.
2. Remove the drip grate.
3. Empty the drip tray.
4. Using sufficient force, place the drip tray back in its original place.
5. Replace the drip grid.
Safety Thermostat
The appliance has a safety thermostat which, in the event of overheating or a fault,
cuts off the power to the appliance and prevents the appliance from operating. The
heating function can be restored manually using the Reset key. It is located at the
back of the appliance.
EN
Fig. 5
18 / 22
In this case, proceed as described below:
– remove the water tank,
– press the reset key by inserting the
supplied reset key (b) into the hole (a).
You may start using the appliance as usual.
Installation and operation
200043
Advertisement
Table of Contents
