Table of Contents
Advertisement
Before Use
1. Before use, clean the appliance observing instructions in section 6.2 'Cleaning'.
2. Dry all cleaned elements and surfaces thoroughly.
3. Fix the drip tray on the appliance base and insert the drip grate.
WARNING!
It is important that only fresh potable water is poured into the water tank.
Do not fill the water tank with any non-potable liquids, like acids, lyes, oils,
nitrates, etc.
NOTE!
To avoid limescale build-up, we recommend using filtered water.
4. Pour required amount of fresh water into
the water tank (only up to 'MAX' mark on
the water tank).
ATTENTION!
EN
The filling level must not be below the
'MIN' mark on the water tank.
For the purpose of filling the water tank, it can
be removed from the base of the appliance.
5. Place the lid on the water tank.
Appliance Start-up
1. Plug the appliance into a suitable single socket.
On the digital display, all the keys light up briefly. Then, '0' appears and the lock key
lights up.
2. Use the corresponding keys on the control panel to set the desired temperature
and water quantity. Observe indications in sections 'Operating Elements /
Displayed Messages / Settings'.
14 / 22
Installation and operation
Fig. 2
200043
Advertisement
Table of Contents
