Advertisement
Quick Links
Advertisement
Related Manuals for Bartscher D3000 KTP-KL
Summary of Contents for Bartscher D3000 KTP-KL
- Page 1 D3000 KTP-KL 292481...
- Page 2 Bartscher GmbH Phone: +49 5258 971-0 Franz-Kleine-Str. 28 Fax: +49 5258 971-120 Service hotline: +49 5258 971-197 D-33154 Salzkotten Germany www.bartscher.com Version: 1.0 Date of preparation: 2021-08-13 Original instruction manual...
- Page 3 Technical Data Thermometer D3000 KTP-KL Name: 292481 Art. No.: Material: plastic ABS Display field dimensions (W 48 x 16,7 x D), in mm: Temperature probe material: stainless steel Temperature probe diameter, in mm: Temperature range, from – to, in °C / °F: -40 - 300 / -58 - 572 Timing of the measurement from –...
- Page 4 • Automatic switch-off after 60 min. • Watertight (protection class IP68) • Temperature range also in Fahrenheit • Important indication: Do not use in oven • The set includes: 1 battery: CR2032 3V List of Components of the Appliance Fig. 1 1.
- Page 5 Button Functions Fig. 2 ON/OFF key By pressing this button for more than 3 seconds, the device can be manually turned on or off. Back illumination button By briefly pressing this button, the background illumination is activated Temperature indicator By pressing this button, you can call up the MIN / MAX stored maximum and minimum temperature values...
- Page 6 3. To turn off the thermometer, press the on/off button for more than 3 seconds. Display illumination The appliance is equipped with interior illumination. 1. Press and hold for a while the on/off button to activate the display illumination. The display illumination is active for 3 seconds. Battery change Fig.
- Page 7 Calibration WARNING! This thermometer has been calibrated at the factory. Should it be necessary to calibrate, please follow the instructions below. Prepare an ice bath for calibration. It is important to keep the correct ratio between ice and water. 1. Fill a suitable vessel to the brim with ice. 2.
- Page 8 Cleaning 1. Clean the thermometer regularly. 2. Clean the thermal probe with a damp cloth. In case of stubborn soiling, use a mild cleaning agent. 3. Wipe with a clean cloth to remove the cleaning agent residues. 4. The thermal probe should be regularly wiped with a disinfectant suitable for contact with food.