Checking The Free Travel Of Foot Brake Lever; Adjusting The Basic Position Of The Foot Brake Lever - KTM 250 SX-F EU 2011 Owner's Manual

Table of Contents

Advertisement

BRAKES

Checking the free travel of foot brake lever

11.8
Warning
Danger of accidents Brake system failure.
If there is no free travel on the foot brake lever, pressure builds up on the rear brake circuit. The rear brake can fail due to
overheating. Adjust free travel on foot brake lever according to specifications.

Adjusting the basic position of the foot brake lever

11.9
Warning
Danger of accidents Brake system failure.
If there is no free travel on the foot brake lever, pressure builds up on the rear brake circuit. The rear brake can fail due to
overheating. Adjust free travel on foot brake lever according to specifications.
Add brake fluid to level
Guideline
Dimension
top edge of container)
Brake fluid DOT 4 / DOT 5.1 (
Position cover
Mount and tighten screws
Info
Clean up overflowed or spilt brake fluid immediately with water.
100927-10
Disconnect spring
Move the foot brake lever back and forth between the end stop and the contact to
the foot brake cylinder piston and check free travel
Guideline
Free travel at foot brake lever
»
If the free travel does not meet specifications:
Adjust the basic position of the foot brake lever.
Reconnect spring
100929-10
x
.
(brake fluid level below
p. 93)
with membrane
.
.
.
.
5 mm (0.2 in)
.
3... 5 mm (0.12... 0.2 in)
x
(
p. 56)
56

Advertisement

Table of Contents
loading

Table of Contents