KTM 250 SX-F EU 2011 Owner's Manual page 38

SERVICE WORK ON THE CHASSIS
–
Position the upper triple clamp with the steering.
–
Mount screw
B00376-10
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
B00377-10
–
Fully tighten screws
Guideline
Screw, bottom triple clamp
B00378-10
–
Tighten screw
Guideline
Screw, top steering head
B00380-10
–
Mount and tighten screw
Guideline
Screw, top steering stem
B00380-11
–
Fully tighten screws
Guideline
Screw, top triple clamp
B00378-11
but do not tighten yet.

toward the front.

.

.

.

M8
.

M8 12 Nm (8.9 lbf ft)
M20x1.5 10 Nm (7.4 lbf ft)
17 Nm Loctite ®
(12.5 lbf ft)
M8 17 Nm
(12.5 lbf ft)
36
243™