Preparing For Rides On Wet Sand; Preparing For Rides On Wet And Muddy Surfaces - KTM 250 SX-F EU 2011 Owner's Manual

PREPARING FOR USE

Preparing for rides on wet sand

6.5

Preparing for rides on wet and muddy surfaces

6.6
–
Clean the chain.
Chain cleaner (
–
Fit the steel sprocket.
Tip
Do not grease the chain.
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
600868-01
–
If used in sand regularly, replace the piston every 20 operating hours.
–
Seal the air filter box.
Tip
Seal the air filter box at the edges against dirt.
–
Clean the air filter and air filter box.
Info
Check the air filter approx. every 30 minutes.
–
Fit a waterproofing device on the air filter.
Waterproofing device for air filter (77206921000)
Info
See the KTM PowerParts fitting instructions.
B00437-01
–
Clean the chain.
Chain cleaner (
–
Fit the steel sprocket.
Tip
Do not grease the chain.
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
600868-01
–
If used in sand regularly, replace the piston every 20 operating hours.
–
Seal the air filter box.
Tip
Seal the air filter box at the edges against dirt.
–
Clean the air filter and air filter box.
Info
Check the air filter approx. every 30 minutes.
p. 95)
x
( p. 42)
x
p. 95)
x
( p. 42)
x
16