General; Safety; Connections And Indicators - Fronius RI FB PRO/i Operating Instructions Manual

General

Safety

Incorrect operation and faulty work can cause serious personal injury and mate-
rial damage.
All work and functions described in this document must be performed by trained
specialist personnel only, who have read and understood the following docu-
ments in full:
▶
▶
▶
Connections and
Indicators
RJ45 ProfiNet connection
Fiber Optic (FO) connection
24
WARNING!
This document
The robot interface Operating Instructions "RI FB PRO/i"
All system component Operating Instructions, especially the safety rules.
1 3
2
1
Pin assignment RJ45 ProfiNet con-
nection
5 7
1
4 6 8
2
3
6
4,5,7,
8
Pin assignment Fiber Optic (FO)
connection
1
2
2
TD+
TD-
RD+
RD-
Not normally used; to ensu-
re signal completeness, the-
se pins must be intercon-
nected and, after passing
through a filter circuit, must
terminate at the ground
conductor (PE).
Optical signal from the Any-
bus CompactCom module
Optical signal from the Any-
bus CompactCom module