Manual Mode; Program Mode - GENERAL LIFE isipark HT300 User Manual

MODE SETTINGS
READY MODES
Comfort Economy
Mode
Your room thermostat has got 5 different modes. 3 of
them(Comfort,Economy and Holiday Mode) are prepared and
constant modes.Other modes are manual mode and weekly program
mode.
In prepared modes ,temperature degrees are based on user's choices
which has been set in the beginning. Manual mode provides to
operate the thermostat with temperature which user's required and
set directly. Weekly program mode provides to keep operate the
thermostat with weekly program which user's set.
Temperature degrees of prepared modes can be changed on

''Settings'' menu.
In order to go to ''Settings'' menu, ' 'Settings'' button needs to be

pressed for 3 seconds.Date and time settings would appear in first
screen,to skip it ''Settings'' button should be pressed for 3 times.
Comfort Mode's temperature degree would appear and
temperature for Comfort Mode can be adjusted by pressing ''Up''
and ''Down'' buttons.
When setting is done, by pressing ''Settings'' button other modes

(Economy and Holiday Mode) can be set.
Pressing ''Settings'' button for 3 seconds again would close

'Settings' screen.
Manual mode temperature can be set by pressing ''Up'' and ''Down''

buttons while on home screen.
When ''Up'' or ''Down'' buttons are pressed thermostat will be set on


Manual Mode.

In order to change to Mode settings you may press ''Mode'' button.


PROGRAM MODE

You can adjust the weekly operating modes of your room thermostat
seperately for each hours per day under favour of weekly program.
Weekly program mode includes 2 active modes. They are "Comfort
Mode" and "Economy Mode"
In order to arrange the weekly program ''Program Mode" button

needs to be pressed for 3 seconds. On the screen there will be icons
for the day which wants to be programmed,hours of the day and
active mode. The hour which will be programmed will be blinking.
By pressing ''Mode'' button, chosen mode for that specific hour may

be changed.
''Up'' and ''down'' button would allow you to change the chosen time

frame and up to the active it can be programmed.
While setting the weekly program to change the date ''Settings''

button should be pressed.
When weekly program is chosen on screen or while setting weekly

program, if the hours on the screen is blinking, it means that the
chosen hours set on ''Comfort'' mode. If the hour is not blinking then
chosen mode is ''Economy''mode. As for blinking hour means active
current time.
After scheduling the weekly program to register it ''Program Mode'

button needs to be pressed for 3 seconds.
Holiday
Mode Mode
MODES
WEEKLY
PROGRAM
MODE
4
MANUAL MODE