Manifold Control Menu Set-Up. P17 - BeaconMedaes MAT-S Installation, Operation And Maintenance Instructions

Medical gas supply system cylinder manifold system and manifold changeover system
Table of Contents

Advertisement

Medical Gas Supply System
2.5
Manifold Control Menu Set-Up.
NOTE - See Section 4.11 for full set-up menu map.
2.5.1
With the manifold installed as detailed in
Sections 2.1 to 2.4, power up the manifold controller.
2.5.2
To access the set-up menu, follow the steps in
Figure 9, followed by Figure 10-14 to complete the set-
up. See Table 2 for the descriptions on the icons in the
menu.
Table 2: Icon Description.
Icon
Description
General icon.
Move to the general setting screen.
Advanced icon.
Takes you to the advanced setting screen,
need password.
Save icon.
Press-confirm the input setting
Cancel icon.
Press-cancel the input setting .
Set up system information.
Press-set up system information.
Enable/Disable icon.
Press-enable/disable the relative function.
Switch icon.
Press-switch different parameter.
Events history icon.
Takes you to the events history screen.
Maintenance icon.
Takes you to the maintenance screen.
User Manuals icon.
Takes you to the user manuals screen.
System information icon.
Takes you to the system information screen.
Special setting icon.
Takes you to the pressure zeroing or service
mode screen.
Home icon.
Takes you to the home screen and system flow
screen.
Alarm icon.
Move to the alarm screen.
icon.
Setting
Move to the
Service icon.
Takes you to the service screen.
Changeover icon.
Press-Manual changeover to the left
cylinder.
Changeover icon.
Press-Manual changeover to the right
cylinder.
Previous icon.
Takes you to the previous screen.
Next icon. Takes you to the next screen.
screen.
setting
Icon
Description
Scroll bar.
Drag the scroll bar to search the item.
Bacnet icon.
Takes you to bacnet menu screens.
System icon.
Move to the system menu screen.
Units of measure icon.
Move the units setting screen.
Gas ID
Show the gas type on home page
Flow value
Show real-time flow on home page.
Figure 9 - Accessing the Set-Up Menu.
1.
Press the setting icon
O2
1500
150
44.0
PSI
2.
Press the system icon in the setting page.
3.
Press the value which need update, and use the keyboard
to modify. Press the save icon
changes made.
17
in the home page.
1500
SCFH
56
1500
66.0
150
PSI
PSI
110.0
to save the
55
PSI
1987
PSI
44
PSI
PSI
66
4109992459.00

Advertisement

Table of Contents
loading

Table of Contents