Specifications (Nominal); Continuous; Intermittent - SIMS Deltec CADD-PLUS 5400 Operator's Manual

4.5

Specifications (Nominal)

4.5.1 Continuous

GIVEN Range
.....................
RES VOL Alarm Range
ML/HR Range
....................

4.5.2 Intermittent

ML Range
...........................
PERIOD Range
CYCLE Range
....................
KVO ML/HR Range
DELAY START Range
CYCLE GIVEN Range
GIVEN Range
.....................
RES VOL Alarm Range
46
000–999 ml in 1-ml increments rounded down to
nearest ml.
000–1,500 ml in 1-ml increments rounded up to the
.....
nearest ml; 000 ml for alarm off.
0.00–75.0 ml/hr in 00.1-ml increments.
0.00–150.0 ml, 00.1-ml increments.
10 min– 12 hr, 10-min increments.
..................
20 min–12 hr:10 min, 10-min increments; and
24 hours for a 24-hour cycle.
00.2–10.0 ml/hr, 00.1-ml increments; and 00.0 when
..........
not using KVO.
10 min–12 hr, 10-min increments, and 0 hr:00 min
.......
when not using DELAY START.
0 min–12 hr:10 min, in 1-min increments; and 0 to
......
24 hours, in 1-hour increments, when CYCLE is
programmed in 24-hour mode.
000–999 ml in 1-ml increments rounded down to the
nearest ml.
000–1,500 ml in 1-ml increments rounded up to the
.....
nearest ml; 000 ml for alarm off.