3.0
OPERATOR INSTRUCTIONS
This section describes how to operate the CADD-PLUS
tailed, step-by-step instructions that will enable you to perform the following
tasks.
•
Installing a battery and observing the Power-up Test
•
Preparing to program the pump
•
Programming the functions in the Continuous mode
•
Programming the functions in the Intermittent mode
•
Attaching the cassette
•
Priming the tubing
•
Setting the lock levels (LL0, LL1, or LL2)
•
Starting and stopping the pump
•
Reviewing the CADD-PLUS
12
...............................................
.............................................................
.....................................................................
...............................................
®
programming modes
pump. It contains de-
®
(Section 3.1)
............
(Section 3.2)
(Section 3.3)
............
(Section 3.4)
............
(Section 3.5.2)
(Section 3.6)
(Section 3.7)
...............................
(Section 3.8)
(Section 3.9)
...............
Need help?
Do you have a question about the CADD-PLUS 5400 and is the answer not in the manual?