Table of Contents
Advertisement
MC250
4.
SAFETY DEVICE. FPC-500 PARACHUTE
4.1. Introduction
According to the specifications of Directive 2006/42/EC, the hoist must have a safety device for
mechanical locking to act if the speed exceeds a set value. The system only operates during the
fall, when the speed exceeds a predetermined value.
4.2. Features
The parachute incorporates 2 identification plates with the CE marking and the characteristics
of the brake, one on the cover and the other inside, nest to the micro:
Brake type and assembling position and direction of rotation
Interlocking speed (r.p.m.) and braking torque (N ∙ m)
Serial number and manufacturing order. Manufacturing date.
4.3. Parachute assembly
The brake will be firmly fixed to the chassis of the machine, so that the pinion is centered with
the rack. The brake must be screwed perfectly to the machine with all screws and washers.
158.3004
DIN 127
ø8
(+34) 944 71 16 00 (+34) 944 53 17 54 export@alba.es
MC250 Rev.02-USA
Washer
Parachute
pinion
DIN 7346
DIN 933
8x20
5x20
www.alba.es
40 of 78
page
Advertisement
Table of Contents
