MC250
3.
USE OF THE MACHINE
3.1. Introduction
The hoist has a point of control exclusively connected to base level panel. All the movements
shall be performed with hold‐to‐run button.
WARNING:
Hoist can only be used by the designated persons, who have been instructed in the
safely hoist operation.
3.2. Using the portable push button control panel
Use the portable control panel from a position in wich you have visual access to the full hoist
railway.
WARNING
It is forbidden to operate the hoist if you do not have visual access to the entire lift
travel.
(+34) 944 71 16 00 (+34) 944 53 17 54 export@alba.es
MC250 Rev.02-USA
page
www.alba.es
36 of 78