Requirements For The Electrical Connection; Erection Of The Hoist; Placement Of The Base Machine - Alba MC250 Original User Manual

MC250

2.4. Requirements for the electrical connection

 Supply point 208V 60Hz, with thermal protection 16A and differential protection of
300mA.
 Cable 3x2,5 mm
in), with no others machines connected, to avoid voltage fault or losses of power in
motor.

2.5. Erection of the hoist

2.5.1 Placement of the base machine
Pay special attention when moving the MC250 for positioning on the scaffolding. The MC250
has a front leg to give stability to the assembly:
Place the hoist at the installation site:
 (+34) 944 71 16 00  (+34) 944 53 17 54  export@alba.es
MC250 Rev.02-USA
2
connected direct to supply point, with max. lenght of 30 m (98 ft 5,1
page
www.alba.es
12 of 78