MC250
2.5.6 Erection of the mast column
WARNING:
The upper endtrack cam and the upper travel stop must be positioned on the last
mast before placing on in the column.
DIN7991 6x40
The position of the upper endtrack cam is very important, as it will limit the vertical travel of
the MC250. For safety and to avoid possible accidents due to mast breakage, the upper part of
the MC250 should never protrude more than 250mm (9.84 in) from the last anchor.
(+34) 944 71 16 00 (+34) 944 53 17 54 export@alba.es
MC250 Rev.02-USA
DIN985 M6
DIN125 ø6,4
DIN985 M8
DIN9021 ø8,4
DIN985 M6
DIN125 ø6,4
DIN7991 6x40
Upper endtrack
Upper endtrack
cam
www.alba.es
19 of 78
page