MC250
WARNING
A parachute must never be mounted in an elevator of characteristics other than
those indicated on the plate.
Only the handling and testing of the parachute is permitted by the manufacturer or
authorized technical personnel.
Finally, place the safety micro cable in its position, in such a way that it blocks the movement of
the machine in case the parachute acts, until the intervention of the technical personnel.
Once the parachute has been assembled, the rear cover will be mounted so that it is
completely sealed and thus preserve the characteristics of the safety device. The own screws of
the brake must not be manipulated under any concept, to guarantee the correct operation.
(+34) 944 71 16 00 (+34) 944 53 17 54 export@alba.es
MC250 Rev.02-USA
page
Parachute
micro
www.alba.es
41 of 78