Introduction To Your; Switching On The Machine - Robot Coupe R 101 Operating Instructions Manual

□
INTRODUCTION TO YOUR
NEW R 101
FOOD PROCESSOR
The R 101 is perfectly geared to professional needs.
It can perform any number of tasks, which you will
gradually discover as you use it.
This food processor consists of a bowl cutter and a
vegetable preparation lid with ejection into the
bowl. In cutter mode, it can be used to process
meat, vegetables, fine stuffing, mousse, grinding,
kneading, ... in less than 5 minutes for even the
longest tasks. In the vegetable preparation version,
the device is delivered with 2 discs For slicing and
grating.
Its numerous functions will open the door to a whole
new culinary world.
This manual contains important information
designed to help the user get the most out of his or
her R 101 bowl cutter/vegetable preparation
device.
We therefore recommend that you read it carefully
before using your machine.
We have also included a few examples to help you
get the feel of your new machine and appreciate its
numerous advantages.
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNECTIONS
Before plugging in, check that your power supply
corresponds to that indicated on the machine's
identification plate.
The R 101 is fitted with various types of motors :
230
V /
50 Hz / 1
115V/60Hz/1
220V/60HZ/1
The machine comes with a single phase plug
connected to a power cord.
This appliance must be plugged into an
earthed socket (risk of electrocution).
• CUTTER BOWL ATTACHMENT
1 ) With the motor base
facing you, make sure
that the bowl is straight
in relation to the motor
shaft, with the safety pin
moved slightly to the left.
ASSEMBLY
rob ot/jcoupe
R10
■
2) Turn the bowl to the
right until the motor
base connectors are se-
curely positioned in their
sockets.
The safety pin should
now be straight in front
of you, in contact with
the front of the motor
base.
4) Place the lid on the
bowl so that the feed-
head is facing you.
Rotate to the right until it
locks.
3) Engage the blade on
the motor shaft and
lower it right to the
bottom of the bowl.
Make sure that it is
correctly positioned, by
rotating it in the bowl.
Once contact is made, your device is ready for use.