Introduction To Your New Vegetable Preparation Machine Cl 20 "D" Version; Switching On The Machine; Advice On Electrical; Assembly - Robot Coupe CL 20 D User Manual

INTRODUCTION TO
YOUR NEW VEGETABLE
PREPARATION MACHINE
CL 20 "D" Version
The CL 20 is perfectly geared to professional needs.
It can perform any number of tasks, which you will
gradually discover as you use it.
This model is equipped with a removable vegetable
preparation attachment made in ABS. New feed
hopper designed for optimum cutting :
- large hopper (area 104 cm
- round feed hopper (Ø 58 mm)
This model is equipped with a patented magnetic
security device and motor braking system which
stops the machine as soon as the bowl or hoppers
are opened.
The CL 20 is supplied with a wide range of discs
and grids to satisfy even the most demanding chefs
when it comes to cutting up fruit and vegetables, i.e.
slicing, grating, and julienne.
Its numerous functions will open the door to a whole
new culinary world.
Thanks to its simple design, all components requi-
ring frequent handling for maintenance or cleaning
can be fitted and removed in a trice.
To make things easier for you, this manual gives a
breakdown of all the various fitting operations.
We place special emphasis on those actions which
cause the machine to stop.
This manual contains important information desi-
gned to help the user get the most out of the CL 20
vegetable preparation machine.
We therefore recommend that you read it carefully
before using your machine.
We have also included a few examples to help you
get the feel of your new machine and appreciate its
numerous advantages.
12
• ADVICE ON ELECTRICAL CONNECTION
Before plugging in, check that your power supply
corresponds to that indicated on the machine's
identification plate.
The CL 20 comes with different types of motors:
The machine comes with a single-phase plug
).
2
connected to a power cord.
This appliance must be plugged into an
earthed socket (risk of electrocution).
The vegetable cutter attachment consists of two detach-
able parts: the vegetable cutter bowl and the lid.
2) Turn the bowl to
the right until the motor
base connectors are
securely positioned in
their sockets.
SWITCHING ON
THE MACHINE
230 V / 50 Hz / 1
115 V / 60 Hz / 1
220 V / 60 Hz / 1
W A R N I N G

ASSEMBLY

1) With the motor base
facing you, fit the bowl
onto the motor base ; the
ejection chute should be
on your right.
3) Engage the white plas-
tic ejecting plate on the
motorshaft and check that
it is correctly positioned at
the bottom of the bowl.
4) Then choose the disc
to be set into the ejecting
plate.
5) Place the lid on the bowl and rotate it to the right
until the lid clicks, to form an extension of the bowl.
USES AND
CHOICE OF DISCS
The vegetable preparation machine CL 20 consists
of two hoppers :
- one large hopper for cutting vegetables such as
cabbage, celeriac...
- one cylindrical hopper for long vegetables and
high precision cutting.
For optimum results, use this section as a cutting
guide.