Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Robot Coupe R 2
Summary of Contents for Robot Coupe R 2
- Page 2 DECLARATION OF CONFORMITY Robot-Coupe - EN 12100 -1 & 2 - 2004: Safety of machinery – General eclares that the machines identified by their type above, principles for design, comply with: - EN 60204-1 -2006: Safety of machinery – Electrical •...
-
Page 3: Table Of Contents
SUMMARY WARRANTY MAINTENANCE • Blade IMPORTANT WARNING • Motor seal • Bowl locating plates INTRODUCTION TO YOUR NEW R 2 TABLE-TOP CUTTER MIXER TECHNICAL SPECIFICATIONS • Weight SWITCHING ON THE MACHINE • Dimensions • Advice electrical connections • Control panel •... -
Page 4: Warranty
ROBOT-COUPE ., LIMITED WARRANTY Labour to sharpen and/ or replacements for SHIPPING DAMAGES. Visible and latent blades which have become blunt, chipped or defects are the responsibility of the freight carrier. Your new ROBOT-COUPE appliance is war- worn after a normal or excessive period of use. The consignee must inform the carrier and consi- ranted to the original buyer for a period of gnor immediately, or upon discovery in the case... -
Page 5: Important Warning
W A R N I N G IMPORTANT WARNING KEEP THESE INSTRUCTIONS IN A SAFE PLACE WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your appliance and enable you to use the equipment correctly. -
Page 6: Introduction To Your
INTRODUCTION TO The R 2 is fitted with various types of motors : 3) Engage the blade on the motor shaft and YOUR NEW R 2 230 V / 50 Hz /1 lower it right to the bot- 115 V / 60 Hz /1 TABLE-TOP CUTTER MIXER tom of the bowl. -
Page 7: Options
OPTION If you wish, you can rinse the bowl by filling it with Max. processing Processing hot water and switching on for a few minutes. USES time quantity (in mn) A serrated blade is available as an option and is (in kg) •... -
Page 8: Bowl Locating Plates
12 kg SAFETY • DIMENSIONS (in mm) The R 2 is fitted with an mechanical safety system. As soon as you open the lid, the motor stops. To restart the machine, simply close the lid and press the green switch. - Page 12 Head Office, French, Robot Coupe Australia Pty Ltd: Robot-Coupe U.K. LTD: Unit 3/43 Herbert St Export and Marketing Department: Fleming Way, Isleworth, 48, rue des Vignerons Artarmon NSW 2064 Australia Middlesex TW7 6EU 94305 Vincennes Cedex- France T (02) 9478 0300 Tel.: 020 8232 1800...
Need help?
Do you have a question about the R 2 and is the answer not in the manual?
Questions and answers