Table of Contents
Advertisement
Quick Links
ESW-66-I
Model
Voltage
ESW-66
110-120V~50/60Hz
ESW-66-I
220V-50/60Hz
BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS
Congratulations on your purchase of this WINCO commercial equipment. WINCO takes pride in the quality of
its products. When used as intended and with proper care and maintenance, you will experience years of reliable
operation from this equipment. To ensure best results, it is important that you read and follow the instructions in this
manual carefully. It's important to save these instructions for future reference.
Operating Instruction Manual
ESW-66
Power
Amperage
400W
3.6A
500W
2.5A
COMMERCIAL ELECTRIC
SOUP WARMER
For California Customers
Overall Dimensions
Plug Type
Length
Depth
NEMA 5-15P
13-1/4"
14-1/2"
(337mm)
(368mm)
CEE 7/7
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Ship
Weight
Height
14-1/2"
12.4 lbs
(368mm)
5.6 kgs
Advertisement
Table of Contents
Related Manuals for Winco ESW-66
Summary of Contents for Winco ESW-66
-
Page 1: Specifications
BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS Congratulations on your purchase of this WINCO commercial equipment. WINCO takes pride in the quality of its products. When used as intended and with proper care and maintenance, you will experience years of reliable operation from this equipment. -
Page 2: Introduction
Winco will not accept A. Apparent damage or loss must be noted on the freight bill liability for the following if: at the time of delivery. -
Page 3: Table Of Contents
• Magnetic Label Holder with Labels SAVE THE ORIGINAL BOX AND PACKAGING FOR USE IN WINCO prides itself on quality and service, ensuring that at the time of PACKAGING AND SHIPPING THE EQUIPMENT IF SERVICES packing, all products are supplied fully functional and free of damage. -
Page 4: Warnings
Important Safeguards To ensure safe installation and operation, please carefully read and understand the following statements. Unless the operator is adequately trained and supervised there is a possibility of serious injury. Owners of this equipment bear the responsibility to make certain that this equipment is used properly and safely, and to strictly follow all of the instructions contained in this manual and the requirements of local, state or federal law. - Page 5 Proper Grounding · Mise à la terre correcte abide by standards set in relation to positioning, spacing, and ventilation. Winco recommends no less than 4” for a ventilation This machine is provided with a three-pronged gap around the perimeter of this unit.
-
Page 6: Operation
• Do not immerse unit in water or use hose to clean. Ne jamais immerger l'appareil dans l'eau ni utilisez un jet d'eau pour le nettoyer. • If the power cord is damaged, it must be replaced by a WINCO® Approved Recommended Qualified Service Technician in order to avoid a hazard. -
Page 7: Troubleshooting
Parts protected by the manufacturer or its agent are not to be adjusted by the installer unless the installer is an authorized service agent. If you have any questions or problems DO NOT send unit to WINCO® without first contacting our customer service department. -
Page 8: Exploded View
Exploded Views MODELS: ESW-66 & ESW-66-I... -
Page 9: Parts List
DS (Red) Heating Element Heating LP This circuit diagram has been provided to assist qualified electricians; only WINCO service agents or qualified electricians should carry out repairs if required. Do not remove any components or service panels on this product. -
Page 10: Limited Warranty
Limited Warranty WINCO® warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for a period of 1 year. The labor warranty is one year from original installation or 18 months from actual factory shipment date, whichever date occurs first. - Page 11 WARRANTY SERVICE THE FOREGOING WARRANTY PROVISIONS ARE A COMPLETE AND EXCLUSIVE STATEMENT BETWEEN THE BUYER AND SELLER. DO NOT send unit to WINCO® without first contacting our customer WINCO® NEITHER ASSUMES NOR AUTHORIZES ANY PERSONS service department: 973-295-3899. TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY IN To initiate warranty service please visit our online portal: CONNECTION WITH SAID EQUIPMENT.
- Page 12 Models: ESW-66 and ESW-66-I www.wincous.com...