BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS Congratulations on your purchase of this WINCO® commercial equipment. WINCO takes pride in the quality of its products. When used as intended and with proper care and maintenance, you will experience years of reliable operation from this equipment.
Introduction Congratulations on the purchase of your WINCO® machine. Please take the time to carefully read through this manual to ensure the machine is operated and maintained properly, to ensure the best possible performance from this product for many years.
• Power Cord SAVE THE ORIGINAL BOX AND PACKAGING FOR USE IN WINCO prides itself on quality and service, ensuring that at the time of PACKAGING AND SHIPPING THE EQUIPMENT IF SERVICES packing, all products are supplied fully functional and free of damage.
Important Safeguards To ensure safe installation and operation, please carefully read and understand the following statements. Unless the operator is adequately trained and supervised there is a possibility of serious injury. Owners of this equipment bear the responsibility to make certain that this equipment is used properly and safely, and to strictly follow all of the instructions contained in this manual and the requirements of local, state or federal law.
Page 5
5. Avoid contact with moving parts. with a damaged cord or plug, or after the unit malfunctions or is dropped or damaged in any manner. Return to the nearest WINCO Authorized Service Center for examination, repair, and / or WARNING AVERTISSEMENT adjustment.
Candy Floss Spinner: Operation After use, it is recommended to use a tougher cleaner, such as a decarbonizer/degreaser solution. To fully remove all the cleaning 1. If using the unit with a generator or long extention cord, solution from the spinning head, the spinner can be turned on without check the Voltmeter on the unit after turning on the power the heat.
• Do not immerse unit in water or use hose to clean. Ne jamais immerger l'appareil dans l'eau ni utilisez un jet d'eau pour le nettoyer. • If the power cord is damaged, it must be replaced by a WINCO® Approved Recommended Qualified Service Technician in order to avoid a hazard.
Parts protected by the manufacturer or its agent are not to be adjusted by the installer unless the installer is an authorized service agent. If you have any questions or problems DO NOT send unit to WINCO® without first contacting our customer service department.
Assembly Instructions - Cotton Candy Machine with Cart MODEL: CCM-28M CONTENTS 2 x Long Square Poles 2 x Handle Brackets 2 x Axle Square Poles 1 x Power Cord 1 x Collection Bowl 3 x Short Square Poles 1 x Sugar Spoon 1 x Axle 1 x Cotton Candy Machine Body 1 x Spare Motor Belt...
Floss 110V Spinner Motor 120V/96 W This circuit diagram has been provided to assist qualified electricians; only WINCO service agents or qualified electricians should carry out repairs if required. Do not remove any components or service panels on this product.
Limited Warranty WARRANTY SERVICE WINCO® warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within To initiate warranty service contact: EquipService@wincous.com North America and subjected to normal use, is free from defects in or call: 973-295-3899 material or workmanship for a period of 1 year.